Casella North America13 Pratts Junction Road,
Sterling, MA 01564-2305, USA
Environmental Boundary Monitoring in Construction: Understanding Data
Parameters and data used can be intimidating to those not familiar with environmental monitoring. Casella covers key parameters for noise, particulate, and vibration so a site manager can know their Leq from their PM10 and PPV! On top of understanding parameters, knowing how to use the data to not only monitor your site in the best way but helping prevent potential complaints will be covered. This will ultimately save the site time and cost.
The webinar will run for approximately 30 minutes with additional time for questions at the end. Don’t miss out and sign up today.
Date: 23rd February 2022
Introduction to Air Sampling
Keep up with the ever-changing requirements and the rigor of air monitoring and testing. Airborne hazards from fibers, gases, dust, and vapours can all cause potentially life-threatening illnesses affecting the lungs. Air sampling is a method of monitoring a worker's exposure to these potential hazards. But how do you go about this? What equipment do you need for each scenario? Join us on this webinar to explore the options and the best practices. There will be a Q&A at the end should it be needed.
Date: 16th March 2022
Introduction to Noise at Work
Casella cover what needs to be done under the Control of Noise at Work Regulations from 2005. From legal implications to responsbilities you have as an employer when it comes to monitoring for noise at the workplace. Using our dBadge2 dosimeters and sound level meters, we will explore ways to remain compliant. The webinar will run for 30 minutes with time at the end for questions.
Date: 13th April 2022
Introduction to Asbestos Sampling
Casella will provide a quick insight into the international use of asbestos, both now and historically. We will cover what is asbestos, the health risk associated with asbestos, how to recognise asbestos, and how to sample for it. Many corporations are dealing with various complex asbestos issues. What are the risks of working with asbestos and is your company compliant with local legislation? The webinar will run for approximately 30 minutes for additional time for questions at the end.
Date: 18th May 2022
Setting up Air Sampling Pumps
Setting up air sampling pumps and their associated items is paramount to ensuring accurate exposure data. This webinar covers selecting the correct pump, setting up the ‘sample train’ and ensuring accurate flow, as well as best practices to ensure good quality data. The webinar will run for 30 minutes with time at the end for questions.
Date: 8th June 2022
Introduction to HAV Monitoring
Hand-Arm Vibration Syndrome (HAVS) is a serious condition that can be prevented with the correct control of exposure. This webinar reviews the terminology about HAV measurement, legislation and exposure limits, as well as how to measure exposure on the tool correctly and subsequently calculate exposure levels.
Date: 6th July 2022
Environmental Boundary Monitoring in Construction: Best Practice
Boundary monitors can measure dust, noise, ground vibration and wind parameters. Getting accurate measurements from these units to ensure quality data for reporting and preventing environmental complaints is critical. This webinar covers the correct siting and installation of monitoring units to ensure compliance with guidance and legislation, and ensures and understanding of the sensors operation and maintenance in line with best practice..
The webinar will run for approximately 30 minutes with additional time for questions at the end. Sign up today.
Date: 23rd February 2022
Introduction to Dust Sampling
Dust monitoring using air sampling pumps has a number of different facets covered during this webinar. These include types of dust to measure and the selection of equipment such as sampling heads or filters. Calculation of airborne concentration, and more importantly exposure, also reviewed over this webinar. A Q&A session will then be held at the end if required.
Date: 14th September 2022
Use of SLMs and Noise Dosimeters; the best practice guide!
Casella cover the principles of when to use a noise dosimeter or sound level meter, with the pros and cons of each. The ‘dos and don’ts’ of each type of instrument and reviewed, giving a best practice guide to get the most out of your noise instruments. The webinar will run for 30 minutes with time at the end for questions.
Date: 19th October 2022
Introduction to Sampling Gases & Vapours
Personal sampling of vapours and gases requires knowledge to select the correct sampling media and to select the right accessories and flow rates. Sources of information are covered as well as how to set up the sample train, selecting the correct air-sampling pump and how to calibrate the equipment. The webinar will run for approximately 30 minutes for additional time for questions at the end.
Date: 24th November 2022
The webinar will be provided over a ‘Webex’ service and you will receive an invitation to the webinar once you have registered. Please remember click the attached link in the invitation email to add this to your calendar!
Webinars will last for approximately 30 minutes and questions can be asked throughout via an inbuilt chat system, but there will also be time at the end for questions as well. A recording of the webinar will also be made available to attendees.
Prefer to speak to someone direct to reserve your spot? You can always contact us directly via email on firstname.lastname@example.org.