Casella Logo


Introduction to Workplace Noise

23rd January, 14th May and 10th September

This webinar covers acoustic terminology such as weightings and parameters, as well as noise dose calculation and how this varies around the world, plus considerations when selecting instruments. The webinar will be 30 minutes with additional time at the end for questions. 


Use of SLMs and Noise Dosimeter; the best practice guide!

4th February, 26th May and 13th August

Covering the principles of when to use a noise dosimeter or a sound level meter, with the pros and cons of each. The 'dos and don'ts' of using each type of instrument are reviewed, giving a best practice guide to get the most out of your noise measurements. The webinar will run for 30 minutes with time at the end for questions.

Introduction to Personal Dust Monitoring

20th February, 18th June and 27th October

Dust monitoring using air sampling pumps has a number of different facets covered during this webinar. These include types of dust to measure and the selection of equipment such as sampling heads or filters. Calculation of airborne concentration, and more importantly exposure, are also reviewed over this 30-minute webinar. A Q&A session will then be held if required.

Casella's personal air sampling pump for airborne contaminants that can be damaging to health. Monitoring solution for dusts.

Setting up Air Sampling pumps

9th March, 23rd June and 15th September

Setting up air sampling pumps and their associated items is paramount to ensuring accurate exposure data. This webinar covers selecting the correct pump, setting up the ‘sample train’ and ensuring accurate flow, as well as best practice to ensure good quality data. The webinar will run for 30 minutes with time at the end for questions.

Casella's Personal Air Sampling Pump for low flow applications. It has been designed particularly for low flow sampling of vapors and gases in working environments.

Introduction to Personal Sampling of Vapours and Gases

19th March, 16th July and 10th November

Personal air sampling of vapours and gases requires knowledge to select the correct sampling media and to select the right accessories and flow rates. Sources of information are covered as well as how to set up the sample train and select the correct air-sampling pump and how to calibrate the equipment. The webinar will run for approximately 30 minutes with additional time for questions at the end.

Introduction to Hand Arm Vibration

7th May, 27th August and 22nd December

Hand-Arm Vibration Syndrome (HAVS) is a serious condition that can be prevented with the correct control of exposure. This webinar reviews terminology about HAV measurement, legislation and exposure limits, as well as how to measure exposure on the tool correctly and subsequently calculate exposure levels.

Here is what you can expect:

The webinar will be provided over a ‘Webex’ service and you will receive an invitation to the webinar once you have registered. Please remember click the attached link in the invitation email to add this to your calendar!

Webinars will last for approximately 30 minutes and questions can be asked throughout via an inbuilt chat system, but there will also be time at the end for questions as well. A recording of the webinar will also be made available to attendees.

Prefer to speak to someone direct to reserve your spot? You can always contact us directly via email on or call into the office on +44(0)1234 844100.